New hybrid LAN Cat.7 cables. These cables meet the highest standards for multi-channel digital audio applications such as DANTE protocol.
DANTE PROTOCOL
Dante was born out of the need to create a technology capable of efficiently transporting digital audio over a common network cable. There were already other previous protocols such as Cobranet or Ethersound, which were slower, limited and more complicated to install. Based on the virtues of these standards and improving their weaknesses, Audinate created Dante.
A simple category 5E or 6 network cable is sufficient to operate this technology. By transmitting the audio digitally, typical problems of analogue transmissions such as cable clutter that can cause crosstalk, or limited length that degrades the signal, are avoided.
Using the Dante Controller application it is very easy to configure Dante networks. Simply connect the devices to an Ethernet switch and connect the computer to the network. The devices are automatically detected by the software.
In addition, Dante has a very interesting application that is sending the signal recurrently through two cables without failure. Many of the devices that can work with Dante support fail-safe redundancy due to the double input/output for a primary channel and another secondary channel. The same signal is sent through both channels so that if the primary channel fails the signal of the secondary channel will be read, avoiding audio loss or interruption.
PRODUCT DESCRIPTION
Q16-6003
IAN:
- 26AWG section BC polished copper conductors.
- FPE foam insulation ensures optimum signal transmission for medium-long distances.
- Shielding of the pairs in aluminium strips and an overall tinned copper braided shield to protect the conductors from possible external interference.
- PVC cover with a diameter of 6.50 mm.
- Compatible with our RJ49 connectors with codes CL512 and CL516
- Compatible with older versions such as Cat.5E, Cat.6 and Cat.6A.
Global:
- Foam coatings to give a circular shape to the outer cover.
- PVC outer cover with a diameter of 16.50 mm.
Q16-6002
IAN:
- 26AWG section BC polished copper conductors.
- FPE foam insulation ensures optimum signal transmission for medium-long distances.
- Shielding of the pairs in aluminium strips and an overall tinned copper braided shield to protect the conductors from possible external interference.
- PVC cover with a diameter of 6.50 mm.
- Compatible with our RJ49 connectors with codes CL512 and CL516
- Compatible with older versions such as Cat.5E, Cat.6 and Cat.6A.
Power:
- Polished copper conductors BC with a section of 2.50 mm².
- PVC insulation in blue, brown and green-yellow.
- PVC cover with a diameter of 8.70 mm.
Global:
- PVC outer cover with a diameter of 19.50 mm.
SALES UNIT
These cables are detailed by meter. We can also serve them finished with the connectors that the user requests.
APPLICATIONS
- Cat.7 cable designed for the transmission of digital audio signals or for the connection of networks in outdoor mobile applications.
- Ideal for high quality digital audio transmission using the Dante protocol, the most widespread on the market. Uncompressed multi-channel audio is transmitted, with synchronization and latency close to 0.
- Suitable for transporting the DMX signal for lighting control.
- With the cable Q16-6002 you can also carry the power supply.
- Many Dante-enabled devices also support fail-safe redundancy. Using the Q16-6003 cable, having two network cables inside, the Dante signal can be sent through a primary and a secondary network on a recurring basis in case the main network fails to prevent audio loss or interruption.
- Signals on balanced pairs for links up to 110 meters.
To learn more about hybrid hoses
To learn more about Q16-6002 https://emelec.es/audiocat/82944-q16-6002.html
To learn more about Q16-6003 https://emelec.es/audiocat/83199-q16-6003.html
Learn more about other LAN cables https://emelec.es/20254-cables-lan-local-area-network