LED Cables

Emelec VíasCom has several ranges of LED cables (12/24 V) designed for different applications. From flat ribbon and 4 or 5-conductor RGB cable for multi-colour lighting, to paral·lels and transparents for two-conductor single-colour lighting. Below we explain their characteristics and show you the different types of cables.

 

Description of the LED cables

A cable for use in LED lighting is composed of two or more conductors depending on the colors you want to feed. Hence, they are classified into two main groups, single-colour or multi-colour (RGB).

Monocolour cables need 2 wires, while RGB cables need 4, three for the colours red, green and blue and another (black wire) to supply the 12/24 V also indicated as positive. There is also the case where RGB + W (Red-Green-Blue + White) is used, in this situation 5 conductors are used, the four indicated for the colours and the black for the positive.

Our cables use copper or tinned copper conductors to provide high conductivity while facilitating soldering. The sheaths are made of flexible PVC to facilitate assembly and installation.

 

RGB Flat Tapes

We have cables for RGB LED connection with 4 and 5-conductor versions for use in RGB or RGB+W LED strips, respectively. The colour of the covers helps to identify the use of each conductor. For each model we have the following sections:

Q10-426 (4-conductor 26AWG)
Q10-424 (4 conductor 24AWG)
Q10-422 (4-conductor 22AWG)
Q10-420 (4 conductor 20AWG)
Q10-526 (5 wires of 26AWG)
Q10-524 (5 wires of 24AWG)
Q10-522 (5 wires of 22AWG)
Q10-520 (5 wires of 20AWG)

LED Cables

RGB cables

In addition to flat ribbons, we also have hoses with RGB conductors for 4-wire LED signals and as a novelty we will soon be adding the same hoses in a 5-wire version. Both in 0.20 and 0.50 mm² cross-sections and black or white covers. The colour of the inner covers helps to identify the use of each conductor. These hoses have an extra flexible cover and are very pleasant to touch.

Q2-570 and Q2-570N (4 wires of 0.20 mm²)
Q2-580 and Q2-580N (4 wires, 0.50 mm²)
Q2-575 and Q2-575N (5 wires of 0.20 mm²) - Soon
Q2-585 and Q2-585N (5 wires of 0.50 mm²)

LED Cables

transparent paral·lels

For the connection of single-colour LEDs we have this parallel transparent series in different sections according to each need. One of the two conductors is marked with a white line to identify its polarity. Flexible cables with an attractive design, pleasant to look at, to be placed on any surface or place.

Q600/022 (0.22 mm²)
Q600/075 (0.75 mm²)
Q600/150 (1.50 mm²)

LED Cables

Hose with covers transparents

Hoses transparents formed by tinned copper conductors slightly twisted inside, which together with the PVC used gives the cable great flexibility. Versions with a section of 0.50 and 0.75 mm² are available. One of the two conductors is marked with a white line to identify its polarity. We also highlight its attractive and elegant design.

Q295/050 (0.50 mm²)
Q295/075 (0.75 mm²)

LED Cables

 

To learn more about these cables

Flat Tape 4 Conductor
Flat Tape 5 conductors
LED Hose 4 wires 0.20 mm² 4-wire
LED Hose 4-conductor 0.50 mm² 4-wire
LED Hose 5-conductor 0.50 mm² 5-conductor 0.50 mm² LED Hose
Transparent Parallel
Transparent Covered Parallel

SUBSCRIBE TO OUR NEWSLETTER 

SUBSCRIBE TO OUR NEWSLETTER

 

Always informed of all news, offers and events. In addition, as a subscriber, you will be able to access exclusive promotions.

 

You have successfully subscribed!

SUBSCRIBE TO OUR NEWSLETTER 

SUBSCRIBE TO OUR NEWSLETTER

 

Always informed of all news, offers and events. In addition, as a subscriber, you will be able to access exclusive promotions.

 

You have successfully subscribed!